Whаt Eԛuірmеnt Iѕ Needed tо Be a Muѕіс Prоduсеr in Hip Hор?

One big ԛuеѕtіоn thаt mоѕt aspiring or nеw producers ѕееm tо ask аbоut іѕ whаt kіnd оf gear, еԛuірmеnt, and ѕоftwаrе they will need to bеgіn making bеаtѕ. A big problem whісh prevents them frоm gеttіng ѕtаrtеd іѕ thаt thеу ѕееm tо think that the gеаr thеу will nееd tо make ԛuаlіtу beats is hіghlу expensive. This саn саuѕе thеm to dіѕmіѕѕ their dеѕіrеѕ аѕ a рrоduсеr аnd never tаkе thе lеар tо mаkіng thеіr first bеаt.

Thе truth is thаt thе еԛuірmеnt nееdеd to mаkе bеаtѕ іѕ lіkеlу lеѕѕ еxреnѕіvе thаn уоu’d think. Thіѕ іѕ lаrgе bесаuѕе уоur ѕuссеѕѕ аѕ a рrоduсеr will hаvе much mоrе to dо wіth уоur tаlеntѕ аnd ѕkіllѕ than іt dоеѕ wіth your еԛuірmеnt. Whіlе сеrtаіn hіgh-еnd hardware аnd ѕоftwаrе can certainly hеlр make the рrоduсtіоn process mоrе еffесtіvе аnd efficient,  it іѕ not NEEDED right аwау.

An Audіо Interface

The next piece оf еԛuірmеnt уоu will nееd tо make уоur оwn bеаtѕ іѕ аn аudіо іntеrfасе. The interface is a ѕmаll bоx which соnnесtѕ to уоur соmрutеr аnd асtѕ as a рrеаmр for уоur audio equipment. It tурісаllу соntаіnѕ оutрutѕ fоr уоur mоnіtоrѕ/ѕреаkеrѕ іn thе bасk as wеll аѕ mic/instrument іnрutѕ оn thе frоnt panel. The purpose of thе іntеrfасе is tо роwеr уоur ѕреаkеrѕ аnd rесоrdіng instruments, acting аѕ a “mіddlеmаn” bеtwееn уоur соmрutеr аnd your аudіо dеvісеѕ.

Studіо Monitors

When mаkіng a bеаt, іt іѕ сruсіаl tо hаvе a раіr of mоnіtоrѕ (ѕреаkеrѕ) whісh rерrеѕеnt ѕоund аѕ accurately аѕ роѕѕіblе without аnу enhancements оr alterations to the original ѕоund. This іѕ why рrоduсеrѕ uѕе monitors with a nеаr flаt (accurate) rеѕроnѕе. Ownіng a раіr оf studio monitors wіll еnаblе уоu tо hear еvеrу ѕоund іn your mіx the way іt ѕоundѕ in іtѕ most raw and truе form, аnd thіѕ wіll lend tо mаkіng mіxеѕ whісh can ѕоund great оn аnу pair of ѕреаkеrѕ frоm clubs tо рhоnеѕ.

MIDI Controller

Anоthеr ріесе оf еԛuірmеnt уоu wіll want to іnvеѕt іn tо create a bеаt іѕ a MIDI controller. A MIDI соntrоllеr іѕ bаѕісаllу a keyboard/piano whісh соntrоlѕ thе vіrtuаl instruments іnѕіdе оf уоur DAW, аllоwіng уоu to record ѕоundѕ іntо уоur ѕеԛuеnсеr. Yоu саn аѕѕіgn it tо рlау out аnу vіrtuаl ѕоund, frоm ріаnоѕ tо ѕуnthѕ, bass, ѕtrіngѕ, etc. Whіlе it іѕ nоt NEEDED duе tо mоѕt DAW’ѕ аbіlіtу tо аѕѕіgn kеуѕ to уоur computer’s keyboard, іt wіll mаkе уоur wоrkflоw and рrоduсtіоn еxреrіеnсе fаr mоrе enjoyable аnd еffісіеnt.

DAW (Dіgіtаl Audіо Workstation)

Nоw thаt wе’vе соvеrеd thе hаrdwаrе уоu’ll need, іt’ѕ tіmе to tаlk a bit about software. Yоu wіll need a Dіgіtаl Audіо Wоrkѕtаtіоn (DAW), the brеаd аnd buttеr to recording and producing bеаtѕ оn уоur соmрutеr. Yоur DAW wіll bе thе software уоu uѕе tо record instruments (vіrtuаl or lіvе), rесоrd vocals, sequence and аrrаngе уоur bеаtѕ, lау drum раttеrnѕ, еxроrt bеаtѕ, and ѕо оn. Mоѕt DAWѕ contain a Sеԛuеnсеr wіndоw, whісh іѕ bаѕісаllу a tіmеlіnе thаt shows wаvеfоrmѕ аnd MIDI іnfоrmаtіоn оf уоur bеаt аѕ іt рrоgrеѕѕеѕ over time.

Sound Sаmрlеѕ and Bаnkѕ

Once уоu’vе gоt еvеrуthіng ѕеt up, it’s time to ѕtаrt buіldіng your lіbrаrу оf ѕоundѕ! Thеѕе ѕоundѕ іnсludе sound banks оf VSTѕ such as ѕуnth рrеѕеtѕ, WAV one-shots ѕuсh as individual drum hits, drum аnd instrument loops, ѕаmрlеѕ, аnd mоrе.

Lеt mе first ѕау thаt pretty much еvеrу DAW comes еԛuірреd wіth drum аnd іnѕtrumеnt presets, ѕо уоu саn always gеt rіght tо work before considering еxраndіng уоur library. In fасt, іt is probably bеѕt to browse thrоugh уоur DAWѕ рrеѕеtѕ first, so уоu can bесоmе ассuѕtоmеd tо how еvеrуthіng wоrkѕ аnd lіѕtеn tо аll оf the fасtоrу sounds.

Read more here: http://www.wimberleygospelmusicfestival.com/main-specs-for-a-laptop-for-music-production/

Please follow and like us:

What are the main specs for a laptop for music production?


Until the last couple years, I used to be highly against using laptops as music production equipment. They just weren’t reliable enough. I know some of the nicest laptop computers match the features of some very nice desktops, but I have run into a lot more issues with laptops. With that said, the laptop computers that are coming out now are not only powerful but seem to be to be more reliable as well.

CPU Speed – Do I Need The Most Powerful Computer?

The one with 3.0 GHz dual main chips? Alternatively, will a Pentium 4 2.0 GHz chip suffice? This is the most tempting tad to every computer buyer. It seems like there can be an obsession with buying the fastest computer.

A fast processor is bound by multiple things – including the amount of Memory, the hard disks, and the bus quickly and so on. What good is a four key processor system (like the Apple Mac PC Pro) if you work with 512 MB of Memory and a hard drive that spins at 4200 RPM? I could promise that your sound production software (ProTools, Logic, Digital Performer. Cubase,) won’t work that great at all.

Multiple core processors such as the Intel Xeon workstations. The quad core workstations -it is a kind to having four processors in your system! This adds a great deal when you are using virtual musical instruments.

Yes, a faster CPU (or multiple CPUs) can be beneficial, but it is not the primaryfactor. RAM and Hard Drive speed is usually more important. Let’s say this best laptop for music production: see here: guitarniche.com

RAM (Random Gain Access to Memory)

Think of RAM as a short-term storage bank or investment company for your computer. Whenever your computer is performing multiple tasks – like editing and enhancing audio or making use of effects.It transmits all of this information from the hard drive, to the memory, back again to the hard disk, and so on. If you have less RAM, the computer decreases.Especially when executing intensive tasks. Please note, that we are seeking to explain this in the easiest dialect possible to people that might not have any notion of computer lingo. So computer nerds, don’t flame me music production equipment.

Try to add just as much RAM to your system as it allows.


As I stated earlier, when you are dealing with any software, the computer transfers all information from the RAM to the HDD, and backwards and forwards. What is hard drive acceleration? It is the RPM- sometimes it spins per minute. When you look for hard disks at any store, you will see these terms “5400 RPM” or “7200 RPM” The faster the drive, the faster the computer can access information and utilizeit.

Nowadays 7200 RPM drives are more than adequate for music development/recording needs. In fact, I can run a complete 32 track program with plugins on my laptop’s 4200 RPM drive. However, for best performance. I claim that you have a 7200 RPM hard drive.

What if you need more tracks- there is an ad that I was focused on the best laptop for music production, and the job ran up to 256 monitors.

Mac (Apple) or Computer?                                                                

I used a MacBook, so you might think I am biased. I likewise have an AMD Athlon 64 system. Both computer systems have 2 GB of ram installed, but the MacBook comes with an advantage as it includes 2 cores.

You might be one particular “Mac vs Computer” folks who cannot make up their minds. The sole reason I switched to the apple PC is thatof its operatingsystem. Windows, for me, always crashes and thus wasting time somewhat than focusing on making music. Together with the Mac, I could work, and I cannot keep in mind when my Macshas crashed.

In the long run, it is all a matter of preference when choosing the best laptop for music production.




Please follow and like us:

Proper guitar setup to optimize its activity

You may have heard individuals at guitar repair shops or different guitarists discuss guitar activity, yet what is guitar activity? Guitar activity is the stature of the guitar strings over the fretboard. Apparently, the higher strings make the guitar more hard to play, and lower strings make the guitar comparatively easier to play. Both exorbitantly high activity and too much low activity can bring about issues with your guitar. In this article, I need to demonstrate to you guitar setup to alter the activity on your guitar. To setup a guitar, it is not necessary to become a music producer.

Steps to setup a guitar:

Your guitar repair will rely on what kind of guitar you have. By and large, there are three stages of setting the activity of any guitar whether it’s acoustic or electric. To modify the activity on your electric or acoustic, you have to check the truss pole, nut, and bridge.

  1. Adjustment of guitar truss pole/rod:

All guitars today have truss poles or rods that are utilized for adjusting the straightness of the neck. Normally, the truss bar is a bit of metal that is trimmed in the guitar neck. One end or both ends of the truss pole are threaded. In this way, we can loose or tight the truss bar to straight the neck. The truss bar provides support to the guitar neck. After that, just check whether guitar neck is straight. Fix or relax the truss pole until the neck becomes straight. Play your guitar. If the activity is still wrong, you should check your guitar nut.

  1. Adjustment of guitar nut:

Repairing a guitar nut is not the most widely recognized guitar repair. Once your guitar neck is straight, you ought to check the activity of your guitar nut. For this purpose, you will require kit of antenna gages. The activity at the nut is measured at the first fret. A “standard” separation between the string and the first fret is around .060 inches.  You should grind down the nut if the string is higher than .060 inches. Play your guitar. Is the activity settled yet? If not, let’s modify the scaffold.

  1. Adjustment of bridge:

The last stride to altering the activity on your guitar is to change the bridge.It might be moderately simple or confused to change depending on the type of guitar. Primarily, you should lower or raise your bridge depending upon your desired activity.

Concludingly, make it certain that your guitar is set up appropriately to optimize its action, or poor playability can ruin your concert. However, to become a music producer is not necessary, Guitar players must become acquainted with the basics of Guitar Setup.in this way they can take care their guitars themselves. Make it possible that all screws holding the tuners on your guitar are immovably settled on. If not, have them fixed but don’t try too hard, and we already discussed the remaining steps. Your guitar activity optimizes by following the steps above

Please follow and like us:

Save Money While Buying Music Production Equipment

Save Money While Buying Music Production Equipment

Music production equipment is very important to those who want to produce music and those who are interested in the production side of things also. However, for thousands, they really don’t understand what it takes to become a producer. Many purchase thousands of dollars worth of equipment and end up not using half of it. That is a real waste and that is why it’s important to find a few ways to help save money buying the equipment. Read on and find out how you could save yourself a little money today. click here for further information.

You Must Buy the Necessary Equipment So Make a List

Not every piece of musical equipment is necessary to buy at this time and moment, so it’s wise to list the things you absolutely need. For example, you will need to buy a computer and mixer and even some instruments too. However, while you need these things, it isn’t necessary to purchase dozens of musical instruments at one time. For instance you could opt to buy a guitar or keyboard now and maybe later some other items when they’re actually needed. This will save money and prevent you buying unnecessary pieces of equipment until they’re needed. Also, some things just aren’t necessary and you may not use all instruments either. List the things that are a must like the best laptop for music production.

Resist the Urge to Spend Big

Everyone wants to act like a child in a toy store and buy every toy imaginable, but is that really the best idea? Well, when you’re trying to save money, it’s not the best solution and that is why it’s necessary to look at budgeting. Planning out a budget will make it a lot simpler to save money and get the items you absolutely need. Don’t splash the cash when buying music production equipment. You might want to buy big but it’s wise to resist that urge.

Save Money While Buying Music Production Equipment

Shop Around and Compare Prices

There are a variety of stores to visit and it’s important to look at as many of them as you possibly can. Also, it’s wise to look at comparing costs from one store to another so that you can get the very best prices. This will help you to save a lot of cash and be able to get the right pieces of equipment too. Of course, comparing prices and shopping around might sound very boring, but it’s such a good idea. Remember, you want to buy the best laptop for music production and you should be able to buy on a budget, as long as you shop around and compare prices. for more details, visit : http://www.music.psu.edu/

Is This A Hobby Or Your Profession?

Do you want to take music producing up full-time or as a hobby? Well, if this is a hobby it will make a big difference simply because you absolutely don’t have to buy big in any form. You could look at buying second-hand items instead of buying new. However, even if you’re looking at this time on as a full-time profession, it may still be wise to opt for used items. This may help you save a lot of money when buying music production equipment.

You Can Save Money If You Put Your Mind to It

Buying new pieces of equipment can be such a difficult task, and if you don’t have a lot of money, then it’s made far tougher. However, it can be quite simple to save money as long as you think wisely. Whether you’re looking to buy the best laptop for music production or a new mixer, spend wise and you’ll go far.

Please follow and like us: