How Evolving Tech Has Changed Music Production

Technology has revolutionized the way we make music, you have to think of 20 years ago even as early as twenty years ago everything was recorded to tape so it was kind of performance-based and if you made a mistake you had to go back and redo it or do a thing called a punch in where you try to just record a certain section. All of these techniques the computer has just made almost obsolete. Here are some ways evolving technology has changed music production.

Midi

MIDI stands for Musical Instrument Digital Interface and it was kind of the first foray where computers became really the heart and soul of how to do a music production. The cool thing about MIDI is you are recording just that information, just what notes you’re playing. how long you’re playing them for, how loud you’re playing them, and because it’s just data it’s unbelievably and infinitely editable. The joy of MIDI is that it can be corrected or what’s called quantized since it is just information. Another thing about MIDI is you can transpose these notes.

Sampling

Essentially think of this as a sound camera so any sound that we can record we could then put into what’s called a sampler and then it could be laid out across the keyboard so we can play it.

Audio

If you want to edit with tape, you would have to cut the tape, pull the sections out, and rearrange them, but the cool thing about what computers can do with audio because this is just digital information to a computer it is really easy to grab a tool like scissors tool and start cutting it up into little sections wherever you want. With the pointer tool, you can rearrange this and put these sections anywhere you want. One of the beautiful things about this is you have the ability to cut out any kind of mistakes because it’s just digital and you can make exact copies of your recording wherever you want.

Plugins

Another way evolving technology has really made our lives better is through something called plugins. Plugins are basically effects processors within the computer and they can affect any audio signal. All I have to do is go to an insert on the particular track and let’s say that you just wanted to do some flange you can simply dial it back and all of this is happening within the computer. Learn more.

Virtual Instrument

Kind of on the same way that we could add a flanger or a delay or reverb to an audio track, we can also generate sound within the computer with a different type of plugin this time called a virtual instrument or a software instrument. With a synthesizer, all the sound can be generated out of a laptop, the midi keyboard controls what notes are being played back, and the parameters can be adjusted just like it could on a real synthesizer.

Technology has changed everything and the techniques highlighted above are now used in every type of music that you hear from country, metal, pop, techno, house, to whatever. It is used in every single piece of music being made today.

Please follow and like us:

What are the main specs for a laptop for music production?

 

Until the last couple years, I used to be highly against using laptops as music production equipment. They just weren’t reliable enough. I know some of the nicest laptop computers match the features of some very nice desktops, but I have run into a lot more issues with laptops. With that said, the laptop computers that are coming out now are not only powerful but seem to be to be more reliable as well.

CPU Speed – Do I Need The Most Powerful Computer?

The one with 3.0 GHz dual main chips? Alternatively, will a Pentium 4 2.0 GHz chip suffice? This is the most tempting tad to every computer buyer. It seems like there can be an obsession with buying the fastest computer.

A fast processor is bound by multiple things – including the amount of Memory, the hard disks, and the bus quickly and so on. What good is a four key processor system (like the Apple Mac PC Pro) if you work with 512 MB of Memory and a hard drive that spins at 4200 RPM? I could promise that your sound production software (ProTools, Logic, Digital Performer. Cubase,) won’t work that great at all.

Multiple core processors such as the Intel Xeon workstations. The quad core workstations -it is a kind to having four processors in your system! This adds a great deal when you are using virtual musical instruments.

Yes, a faster CPU (or multiple CPUs) can be beneficial, but it is not the primaryfactor. RAM and Hard Drive speed is usually more important. Let’s say this best laptop for music production: see here: guitarniche.com

RAM (Random Gain Access to Memory)

Think of RAM as a short-term storage bank or investment company for your computer. Whenever your computer is performing multiple tasks – like editing and enhancing audio or making use of effects.It transmits all of this information from the hard drive, to the memory, back again to the hard disk, and so on. If you have less RAM, the computer decreases.Especially when executing intensive tasks. Please note, that we are seeking to explain this in the easiest dialect possible to people that might not have any notion of computer lingo. So computer nerds, don’t flame me music production equipment.

Try to add just as much RAM to your system as it allows.

HARD DISK DRIVE Speed

As I stated earlier, when you are dealing with any software, the computer transfers all information from the RAM to the HDD, and backwards and forwards. What is hard drive acceleration? It is the RPM- sometimes it spins per minute. When you look for hard disks at any store, you will see these terms “5400 RPM” or “7200 RPM” The faster the drive, the faster the computer can access information and utilizeit.

Nowadays 7200 RPM drives are more than adequate for music development/recording needs. In fact, I can run a complete 32 track program with plugins on my laptop’s 4200 RPM drive. However, for best performance. I claim that you have a 7200 RPM hard drive.

What if you need more tracks- there is an ad that I was focused on the best laptop for music production, and the job ran up to 256 monitors.

Mac (Apple) or Computer?                                                                

I used a MacBook, so you might think I am biased. I likewise have an AMD Athlon 64 system. Both computer systems have 2 GB of ram installed, but the MacBook comes with an advantage as it includes 2 cores.

You might be one particular “Mac vs Computer” folks who cannot make up their minds. The sole reason I switched to the apple PC is thatof its operatingsystem. Windows, for me, always crashes and thus wasting time somewhat than focusing on making music. Together with the Mac, I could work, and I cannot keep in mind when my Macshas crashed.

In the long run, it is all a matter of preference when choosing the best laptop for music production.

 

 

 

Please follow and like us:

Proper guitar setup to optimize its activity

You may have heard individuals at guitar repair shops or different guitarists discuss guitar activity, yet what is guitar activity? Guitar activity is the stature of the guitar strings over the fretboard. Apparently, the higher strings make the guitar more hard to play, and lower strings make the guitar comparatively easier to play. Both exorbitantly high activity and too much low activity can bring about issues with your guitar. In this article, I need to demonstrate to you guitar setup to alter the activity on your guitar. To setup a guitar, it is not necessary to become a music producer.

Steps to setup a guitar:

Your guitar repair will rely on what kind of guitar you have. By and large, there are three stages of setting the activity of any guitar whether it’s acoustic or electric. To modify the activity on your electric or acoustic, you have to check the truss pole, nut, and bridge.

  1. Adjustment of guitar truss pole/rod:

All guitars today have truss poles or rods that are utilized for adjusting the straightness of the neck. Normally, the truss bar is a bit of metal that is trimmed in the guitar neck. One end or both ends of the truss pole are threaded. In this way, we can loose or tight the truss bar to straight the neck. The truss bar provides support to the guitar neck. After that, just check whether guitar neck is straight. Fix or relax the truss pole until the neck becomes straight. Play your guitar. If the activity is still wrong, you should check your guitar nut.

  1. Adjustment of guitar nut:

Repairing a guitar nut is not the most widely recognized guitar repair. Once your guitar neck is straight, you ought to check the activity of your guitar nut. For this purpose, you will require kit of antenna gages. The activity at the nut is measured at the first fret. A “standard” separation between the string and the first fret is around .060 inches.  You should grind down the nut if the string is higher than .060 inches. Play your guitar. Is the activity settled yet? If not, let’s modify the scaffold.

  1. Adjustment of bridge:

The last stride to altering the activity on your guitar is to change the bridge.It might be moderately simple or confused to change depending on the type of guitar. Primarily, you should lower or raise your bridge depending upon your desired activity.

Concludingly, make it certain that your guitar is set up appropriately to optimize its action, or poor playability can ruin your concert. However, to become a music producer is not necessary, Guitar players must become acquainted with the basics of Guitar Setup.in this way they can take care their guitars themselves. Make it possible that all screws holding the tuners on your guitar are immovably settled on. If not, have them fixed but don’t try too hard, and we already discussed the remaining steps. Your guitar activity optimizes by following the steps above

Please follow and like us: